» Products http://www.precisefacilities.com.au Mon, 01 Jul 2019 02:24:32 +0000 en-US hourly 1 Fluke i1010 600A AC / 1000A DC Current Probe http://www.precisefacilities.com.au/product/fluke-i1010-600a-ac-1000a-dc-current-probe/ http://www.precisefacilities.com.au/product/fluke-i1010-600a-ac-1000a-dc-current-probe/#comments Thu, 30 Oct 2014 05:04:57 +0000 http://www.precisefacilities.com.au/?post_type=product&p=1159 The Fluke i1010 Current Probe enables the measurement of both AC and DC currents with a digital multi meter. It features high accuracy with a wide bandwidth and a high level of noise immunity for use with ASDs. The large jaw design also allows for access to difficult to reach measurement locations.

The post Fluke i1010 600A AC / 1000A DC Current Probe appeared first on .

]]>

The Fluke i1010 Current Probe enables the measurement of both AC and DC currents with a digital multi meter. It features high accuracy with a wide bandwidth and a high level of noise immunity for use with ASDs. The large jaw design also allows for access to difficult to reach measurement locations.

Brief Specs:

  • Measurement type: Hall sensor 
  • Nominal current range: 600A AC,  1000A DC
  • Continuous current range: 1A – 600A AC, 1A – 1000A DC
  • Maximum Non-Destructive Current: 1000A
  • Lowest measurable current: 0.5A 
  • Basic Accuracy: 2% + 0.5 A (% reading + floorspec)
  • Useable frequency: DC – 10 kHz
  • Output level(s): 1 mV/A
  • Zero error adjustment: Yes
  • Safety: CAT III, 600 V
  • Maximum voltage: 600 V

The post Fluke i1010 600A AC / 1000A DC Current Probe appeared first on .

]]> http://www.precisefacilities.com.au/product/fluke-i1010-600a-ac-1000a-dc-current-probe/feed/ 0 Hioki 3283 200A AC Leakage Clamp Meter http://www.precisefacilities.com.au/product/hioki-3283-200a-ac-leakage-clamp-meter/ http://www.precisefacilities.com.au/product/hioki-3283-200a-ac-leakage-clamp-meter/#comments Fri, 31 Oct 2014 01:27:16 +0000 http://www.precisefacilities.com.au/?post_type=product&p=1169 The Hioki 3283 200A AC Leakage Clamp Meter is designed for true RMS current measurement on live circuits. A highly sensitive resolution of 10μA along with a full scale up to 10mA provides a wide range of leakage current measurements with an accuracy of ±1%. It also features analyser functions for filtering and output signals, and can be used in combination with a HIOKI Memory HiCorder for the long-term monitoring for leakage current fluctuations.

The post Hioki 3283 200A AC Leakage Clamp Meter appeared first on .

]]>

The Hioki 3283 200A AC Leakage Clamp Meter is designed for true RMS current measurement on live circuits. A highly sensitive resolution of 10μA along with a full scale up to 10mA provides a wide range of leakage current measurements with an accuracy of ±1%. It also features analyser functions for filtering and output signals, and can be used in combination with a HIOKI Memory HiCorder for the long-term monitoring for leakage current fluctuations.

Brief Specs:

AC current

  • 10.00m/ 100.0m/ 1.000/ 10.00/ 200.0A, 5 ranges, (40Hz to 2kHz,True RMS)
  • Basic accuracy: ±1.0 % rdg. ±5 dgt.  

Frequency

  • 30.0Hz to 1000Hz, 2 ranges, Basic accuracy: ±0.3 % rdg. ±1 dgt.  

Crest factor

  • 2.5 or less (1.5 at 200A range)  

Filter function

  • Cut off frequency at filter ON: 180 Hz (-3dB)

Output

  • REC output for current: DC 1 V/f.s. (2 V/f.s. at only 200A range), response time: less than 200 ms.
  • MON output for current: AC 1 V/f.s. (2 V/f.s. at only 200A range), 5Hz to 15kHz frequency bandwidth (-3 dB)  

Other functions

  • Max./ Min./ Average value record, Data hold, Auto power off

The post Hioki 3283 200A AC Leakage Clamp Meter appeared first on .

]]> http://www.precisefacilities.com.au/product/hioki-3283-200a-ac-leakage-clamp-meter/feed/ 0